Pfeiffer TMH 1001 P Turbomolecular Vacuum Turbo Pump DN 200 ISO-K 3P 920 L/S new

Description

YOU ARE BUYING ONE NEW IN BOX NEVER USED PFEIFFER TMH 1001 P TURBOMOLECULAR PUMP DN 200 ISO-K 3P, PM P03 300 G, S(N2): 920 L/S, N, F: 39600 1/MIN, 660HZ, 37KG. THIS ITEM IS NEW SURPLUS REMOVED FROM A SHUTDOWN FACILITY AND IS GUARANTEED NEW.
IF YOU HAVE ANY QUESTIONS PLEASE HIT ASK THE SELLER A QUESTION.(MWD10X1)(JL)
International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as "gifts"
THE FOLLOWING IS FOR INFORMATION PURPOSES ONLY AND MAY NOT BE INCLUDED IN THIS AUCTION:
TMH_TMU_1001_P_1001_PC.jpg  1.1. Main Features  Turbo Pumps TMH 1001 P, TMH 1001 PC , TMU 1001 P, TMU 1001( TMH 1001 P, TMH 1001 PC , TMU 1001 P, TMU 1001PC) with the TC 600 form a complete unit. Voltage is supplied by power unit.   Cooling  Standard: Water cooling. Alternative: For the TMH 1001 P, TMH 1001 PC, TMU 1001 P, TMU 1001 PC ( TMH 1001 P, TMH 1001 PC , TMU 1001 P, TMU 1001PC) air cooling as an accessory (permissible ambient temperature ≤ 35 °C). Integrated protective measures against excess temperatures: The Electronic Drive Unit TC 600 reduces the rotor rotation speed. The TMH 1001 P, TMH 1001 PC , TMU 1001 P, TMU 1001 PC ( TMH 1001 P, TMH 1001 PC , TMU 1001 P, TMU 1001PC) designed for corrosive.  Bearings  High vacuum side: Wear free permanent magnetic bearing. Fore-vacuum side: Oil circulatory lubricated ball bearing with ceramic balls.  Proper Use  * Only PFEIFFER power units may be used to operate the TC 600. The use of other power units requires the prior agreement of the manufacturer and equalization with the valid specification.  * The Turbomolecular Pumps TMH 1001 P, TMH 1001 PC, TMU 1001 P, TMU 1001 PC ( TMH 1001 P, TMH 1001 PC , TMU 1001 P, TMU 1001PC), (please see the rating plate) are designed to pump corrosive gases and vapours. Where corrosive gas processes are involved, gas bonding and particels which can damage the surfaces of the pump can be produced. The motor and bearing compartments have to be protected with sealing gas.  * If the pump is to be operated with more than 50% of the permissible gas load, sealing gas must be used.  * The turbopumps may only be used to pump those media against which they are chemically resistant. For other media the operator is required to qualify the pumps for the processes involved.  * If the process produces dust, the maintenance intervals must be specified accordingly and sealing gas must be used.  * If the pump is to be operated with more than 50% of the permissi and International government regulations prohibit such behavior.